How to zoom the image, How to realize the text overlay setting – RGBLink VENUS X1 Quick Start User Manual

Page 12

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

The image can be zoom in horizontal or vertical separately, to meet the special effects required.

Push the [MENU] button to go into the menu items, turn the knob and choose , push the knob

to confirm. Turn the knob, and choose , show the menus as following:

V UP--Zoom in vertical and the image will be zoom in to the top direction from its bottom.

V DOWN--Zoom in vertical and the image will be zoom in to the down direction from its top.

V UP/DOWN--Zoom in vertical but in both top and down direction from its middle.

H LEFT--Zoom in horizontal and the image will be zoom in to the left direction from its right.

H RIGHT--Zoom in horizontal and the image will be zoom in to the right direction from its left.

H LIFT/RIGHT--Zoom in horizontal but in both left and right direction from its middle.

CENTER--Zoom in 4 corner direction from center.

Before setting the text overlay, please make sure the input channel of the text. For example, set VGA

input as the text channel. Then make sure the channel that the text will overlay, for example, overlay the

text on DVI channel. The operations are as follows:

1. Push the VGA button to make sure there is VGA input.

2. Push the DVI button to make sure there is DVI input.

3. Push the [MENU] button, turn the knob, choose , push the knob to confirm, turn the

knob, and choose , push the knob to confirm.

Then enter into TEXT OVERLAY menu items, turn the knob, and choose , push

the knob to confirm, turn the knob again, and choose “ON” to enable the text overlay function.

4. Make sure VGA input is IMAGE B, and DVI input is IMAGE A, if not, choose

option by pushing [PIP] button, and choose “ON” for .

5. Choose the VGA image in “IMAGE B” in