How to user define the scale key, How to use black out – RGBLink VENUS X1 Quick Start User Manual

Page 14

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

(3) If choose , push the button, its LED light turns on, user can adjust the brightness,

contrast, saturation, sharpness, color red, color green, color blue and gamma. If image quality

distorts by improper operation, it can be recover by reset.

System default the [SCALE] button as scale function. push the button to enter the scale menu. Turn the

knob to select the relevant sub menus.

For more details, please refer to:

How to Set the Size and Position of the Single Image

Besides SCALE, user can define this button as TAKE, the operations are as follows:

1. Push the [MENU] button to enter to the menu items, turn the knob, and choose .

2. Push the knob to confirm, turn the knob, and choose .

3. Push the knob to confirm, turn the knob, and choose .

4. Push the knob to confirm, turn the knob, and choose , push the knob to confirm.

5. After define SCALE KEY as TAKE, the SCALE button will light up, choose the signal that need to take

first, the signal button you have selected will flash and the main menu will show the TAKE source you

have selected.

6. After choose the signal, push the [SCALE] ([TAKE]) button, and the signal will be taken to the output.

Black out descriptions:

Black signal realizes one-key-touch to a black screen.

VENUS X1 provides black effect processing for output with cut black effect. Operation is as below:

Push the [BLACK/0] button, then output will cut to BLACK, shown as below: