How to user define the black key – RGBLink VENUS X1 Quick Start User Manual

Page 13

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

position.

The standard position and size is: ensure the VGA image overlay on the DVI image, display normally

and without black edges. If there are black edges around VGA image, choose option in

to adjust.

6. Set the text overlay mode: choose option in , push the knob to enter

into the menu items. Turn the knob to choose the preset mode, for example, set the VGA

text as WhOnBk, choose WhOnBk1 or WhOnBk2 (Note: Text Overlay only support monochrome

subtitles), user can also adjust the or to get a better effect.

7. Push the [SAVE/1] button to save the above parameters.

System default the [BLACK] button as black function. Push the button, its LED light turns on, the output

will be switched to black, push the button again, its LED light is off, and output the video image.

For more details, please refer to:

Besides BLACK, user can define this button as FREEZE, TEST PATTERN and BRIGHT, the

operations are as follows:

1. Push the [MENU] button to enter to the menu items, turn the knob, and choose .

2. Push the knob to confirm, turn the knob, and choose .

3. Push the knob to confirm, turn the knob, and choose .

4. Push the knob to confirm, turn the knob, and choose , or ,

push the knob to confirm.

(1) If choose , push the button, its LED light turns on, and freeze the image. Push the

button again, its LED light is off, and output the video image.

(2) If choose , push the button, its LED light turns on, the output will be switched

to test pattern. There are 66 kinds of test patterns. If choose , VENUS X1 will

output all the test patterns one by one, and the interval between is 1 to10S. Push the button

again, its LED light is off, and output the video image.