How to choose and custom output resolution – RGBLink VENUS X1 Quick Start User Manual

Page 10

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

knob or number buttons.

H SIZE: Width setting.

V SIZE: Height setting.

H/V SIZE: Width and height equal proportion scale setting.

H POS: Horizontal phase setting.

V POS: Vertical phase setting.

RESET: If image quality distorts by improper operation, it can be recover by reset.

Choose standard resolution:

Push the [MENU] button to enter the menu items, turn the knob and choose , push the knob

to confirm, turn the knob to choose , push the knob to confirm, turn the knob again to

choose the output resolution according to actual need.

Customized resolution setting:

Push the [MENU] button to enter the menu items, turn the knob and choose , push the knob

to confirm, turn the knob to choose , push the knob to confirm.

Turn the knob on each digital position, and change the value of the digital by the digital buttons on the

front panel.

After the digital, push the knob will add *, means before * is the horizontal size. Same operation for

vertical size.

After the digital, push the knob will add @, means before the @ is the vertical size, and after the @ is

the refresh rate. Only digital 50 or digital 60 supports for the refresh rate. Use the digital buttons to

finish the settings.

After input all the values, push knob to enable VENUS X1 to output this resolution. VENUS X1 will