How to realize the screen size switching – RGBLink VENUS X1 Quick Start User Manual

Page 11

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925771202

Email: [email protected] http://www.rgblink.cn

take 5-10 seconds to enable this output resolution.

VENUS X1 supports the screen parameters to meet the requirement where user want to switch

between scale screen size and full display size (like monitor). This is only enable for a single display

window. Following is an example of a screen size is1408 x 832.

Operator can defined the VENUS X1 output resolution from standard output resolution list or

customized the output resolution which is higher than1408 x 832. For this application 1440x900 is an

example:

Push the [MENU] button to go into the main menu, turn the knob and choose , push the

knob to confirm, turn the knob to choose , push the knob and goes into the

SCREEN PARAMETERS menus as following:

H SIZE--Horizontal pixels, turn knob or use the digital button to input the value1408.

V SIZE--Vertical pixels, turn knob or use the digital button to input the value 832.

H POS--Horizontal position, default value is 0, set the value as the way of H SIZE and V SIZE.

V POS--Vertical position, default value is 0, set the value as the way of H SIZE and V SIZE.

MODE-- Mode option, choose SCREEN SIZE.

RESET: If image quality distorts by improper operation, it can be recover by reset.