REMKO CMF-120-1P - Manual (Page 5)

Care and maintenance
Regular care and maintenance
serves to ensure trouble-free
operation and long service-life of
the heat-pump system.
Care
■
The indoor and outdoor
modules must be kept free
of soiling, vegetation and other
deposits.
■
The device is to be cleaned with
a damp cloth. In doing so, it is
to be ensured that no caustic,
abrasive or solvent-based
cleaning products are used. Use
of powerful water jets is to be
avoided.
■
The fins on the outdoor module
are to be cleaned at least once
a year.
Maintenance
■
To perform the statutory seal
test, it is necessary to arrange
an annual maintenance contract
with an appropriate specialist
firm.
As the refrigerant capacity
exceeds 3kg, an
annual seal
inspection must be made
of the refrigerant circuit by
a firm specializing in this
field. A heating system should
always be serviced annually.
Therefore, we recommend
arranging for a service
contract that includes the seal
inspection.
NOTE
Temporary
shut-down
The system may not be switched
off at the mains power supply even
if the heating system is not used for
heating purposes over an extended
period (e.g. holidays)!
■
The system is to be switched
to "Stand-by" mode during
temporary shut-down periods.
■
Heating phases can be
programmed for the duration
of the period of absence.
■
The previous operating mode
has to be switched back on
when the shut-down phase
is over.
■
Instructions for changing
the mode appear in the
corresponding chapter of the
heat-pump manager's manual.
In "Standby" , the heat pump
is in standby mode.
Of the entire system, only
the frost-protection function
s activated.
NOTE
Disposal of packaging
All products are packed for
transport in environmentally
friendly materials. Make a valuable
contribution to reducing waste
and sustaining raw materials. Only
dispose of packaging at approved
collection points.
Only recyclable materials are used
in the manufacture of the devices
and components.
Help protect the environment
by ensuring that the devices
or components (for example
batteries) are not disposed in
household waste, but only in
accordance with local regulations
and in an environmentally safe
manner, e.g. using certified firms
and recycling specialists or at
collection points.
Warranty
Prerequisites for possible warranty
claims are that the customer or
his accepting representative has
completely filled out the "warranty
registration card" supplied with
the unit and returned it to REMKO
GmbH & Co. KG REMKO GmbH
& Co. KG and placing the unit in
service.
The warranty conditions are listed
in the "General Business and
Delivery Conditions". Furthermore,
only the parties to a contract
can strike special agreements
beyond these conditions. For this
reason please contact your direct
contractual partner first.
Environmental
protection and
recycling
Disposal of equip-
ment and components
5
Prior to performing any
work, ensure the equipment
is isolated from the voltage
supply and secured to prevent
accidental switch-on! Note
that several power feeds
(circuits) are brought together
in the interior module.
! CAUTION