REMKO CMF-120-1P - Manual (Page 16)

REMKO CMF / CMT
■
The wall bracket is to be
attached to the wall with the
fasteners supplied and the
indoor module hooked onto it.
■
The wall must possess sufficient
load-bearing capacity for the
weight of the indoor module.
■
Ensure that the wall bracket
is installed level.
■
The indoor module can be
aligned precisely by means of
the adjustment screws on the
back of the housing.
■
The indoor module is to
be mounted in such a way
that all of the sides have
sufficient space for purposes
of installation and maintenance.
It is equally important that
there is sufficient space above
the device for installing the
safety assembly.
Only fasteners suitable for the
given application may be used.
NOTE
Installation or setting up the indoor module
Indoor module CMF Series Indoor module CMT Series
■
The indoor module must be
installed on a firm, level surface.
■
The surface must possess
sufficient load-bearing capacity
for the weight of the indoor
module.
■
The height-adjustable feet can
be used to level the indoor
module precisely .
■
The indoor module is to
be mounted in such a way
that all of the sides have
sufficient space for purposes
of installation and maintenance.
It is equally important that
there is sufficient space above
the device for installing the
pipes and the safety assembly.
Wall mounting CMF 120-1P/160-1P
Floor mounting CMT 120-1P/160-1P
16