REMKO BL 261 - Manual (Page 7)

"TIMER OFF" key
Press this key to program the
automatic switch-off time
of the unit within the next
24 hours.
"HR" key
Press this key to set the hours.
"MIN" key
Press this key to set the
minutes.
"RESET" key
(in battery compartment)
Press this key to reset the
remote control to its factory
settings.
"CLOCK" key
(in battery compartment)
Press this key to activate the
time setting.
"DISPLAY" key
Press this key to switch the
display on and off (no influence
on device functionality)
Keys on the remote control
2. Cooling mode
In this mode, the warm air in
the room is cooled down to the
desired temperature.
3. Dehumidification mode
In this mode the room is mainly
dehumidified and the adjusted
temperature is maintained.
4. Heating mode
In this mode, the warm air in
the room is warmed to the
desired temperature.
"FAN" key
Press this key to set the
desired fan speed. 4 speeds
are available: Automatic, high,
medium and low fan speed.
"FINS" key
Press this key to set the desired
fin position. 5 positions and
an oscillating are function
available.
"SLEEP" key
Press this key to automatically
increase or decrease the target
temperature by 1°C every hour
in cooling and heating mode
respectively.
"SWING" key
Press this key to directly
activate the oscillating function
of the fins for better air
distribution in the room.
"TIMER ON" key
Press this key to program
the automatic activation time
of the unit within the next
24 hours.
Keys on the remote control
"ON/OFF" key
Press this key to operate the
unit.
"TOO HOT" key
Press this key to decrease
the desired temperature to
16°C.
"TOO COLD" key
Press this key to increase the
desired temperature to 31°C.
"MODE" key
Press this key to select the
operating mode.
The indoor unit has 4 modes:
1. Automatic mode
In this mode, the unit works in
cooling or in heating mode.
7