REMKO BL 261 - Manual (Page 12)

There are individually adjustable
fins for adjusting the horizontal air
distribution on the air discharge
side.
Manual air distribution
Moving interior parts such as
the fan may to cause injury
during operation!
Only make adjustments after
swing operation has been
turned off.
! ATTENTION
Shift lever left
Manual air distribution
Shift lever right
Decommissioning
Temporary
Decommissioning
1. Let the indoor unit run for 2
to 3 hours in circulation mode,
or in cooling mode at maximum
temperature, to extract any
residual humidity from the unit.
2. Shut down the system using the
remote control.
3. Switch off the voltage supply to
the unit.
4. Cover the unit as far as possible
with plastic foil in order to
protect it from the influences of
weather.
Care and maintenance
Regular care and maintenance
ensure the trouble-free operation
and long service life of the unit.
Care
■ Ensure that the indoor unit
and outdoor component are
protected against dirt, mould
and other deposits.
■ Clean the units with a damp
cloth. Do not use any caustic,
abrasive or solvent-based
cleaning products. Do not use
a jet of water.
■ Clean the fins on the indoor
unit and outdoor component
prior to long shutdown periods.
Prior to performing any work,
ensure that the equipment
is isolated from the voltage
supply and secured to prevent
accidental switch-on!
! ATTENTION
Permanent
decommissioning
Ensure that equipment and
components are disposed of in
accordance with local regulations,
e.g. through authorised disposal
and recycling specialists or at
collection points.
REMKO GmbH & Co. KG or your
contractual partner will be pleased
to provide a list of certified firms in
your area.
REMKO BL
12