REMKO BL 261 - Manual (Page 11)

TIMER Key
The activation and switch-off time can be programmed with this key.
The timer is activated and the clock display is switched off by pressing
the Timer On or Timer Off keys. The timer symbol for the switch-on/
off time will flash. The timer display on the indoor unit illuminates.
The desired switch on or switch off time is set by pressing the keys HR.
and MIN. Following adjustment, the timer symbol blinks for another
30 seconds. When the programmed time has been reached, the unit
automatically switches on or off. If the indoor unit is automatically
switched on, the mode, temperature and fan speed for the last setting
are activated. The switch on/off time can be prematurely cancelled by
pressing the appropriate timer key or the ON/OFF key. The timer display
on the indoor unit turns off.
TIMER Key ON
Timer on HR/MIN 30 sec.
TIMER Key OFF
Timer off HR/MIN 30 sec.
A programming function is activated with this key, which increases the
target temperature in cooling mode by 1°C after one hour and by 2°C
after 2 hours. In heating mode, the target temperature is decreased
by 1°C after one hour by 2°C after 2 hours. The unit switches off
automatically after 8 hours.
SLEEP Key
TIMER Key ON/OFF
Unit On Unit Off
Example:
The controller turns on at 10:20.
The unit is in operation until 05:00.
The controller turns the unit on and off daily at the programmed time.
During operation, all settings and the timer symbol can be seen on the
display. When not in operation, the display 0->1 and the timer symbol
can be seen.
SLEEP SLEEP SLEEP
11