REMKO BL 261 - Manual (Page 4)

Safety notes
Disposing of the units and
their components
Only recyclable materials are used
in the manufacture of the units
and components.
Help protect the environment
by ensuring that the units or
components (for example
batteries) are not disposed of
in household waste, but only in
accordance with local regulations
and in an environmentally safe
manner, e.g. using authorised
disposal and recycling
specialists or council
collection points.
Intended use
Depending on the model, the
units and the additional fittings
with which they are equipped are
only intended for private use as
an air-conditioner for the purpose
of cooling or heating the air in an
enclosed space.
Any different or additional use shall
be classed as non-intended use.
The manufacturer/supplier assumes
no liability for damages arising from
such use. The user bears the sole
risk in such cases.
Intended use also includes
working in accordance with the
operating manual and installation
instructions and complying with the
maintenance requirements.
Carefully read this operating
manual before starting the unit
for the first time. It contains
useful tips and notes as well as
hazard warnings to prevent injury
or material damage ! . Failure
to follow the directions in this
manual not only presents a danger
to people, the environment and
the system itself, but will void any
claims for liability.
■ Keep this operating manual and
the refrigerant data sheet near
to the unit.
■ The units and components
should be set up and installed
only by qualified personnel.
■ The set-up, connection,
and operation of the unit and its
components must take place in
accordance with the operating
conditions stipulated in this
manual and comply with all
applicable local regulations.
■ Mobile units must be set up
securely on suitable surfaces and
in an upright position. Stationary
units must be permanently
installed for operation.
■ Modification of units and
components supplied by
REMKO is not permitted and
can cause malfunctions.
■ Units and components may
not be operated in areas where
there is an increased risk of
damage. Observe the minimum
clearances.
■ The electrical supply is to be
adapted to the requirements
of the units.
■ The operational safety of
the units and components
is only assured if they are
fully assembled and used as
intended. Safety devices may
not be modified or bypassed.
■ Do not operate units or
components with obvious
defects or signs of damage.
■ All housing parts and openings
in the unit, e.g. air intakes and
outlets, must be free of foreign
objects, fluids, or gases.
■ The units and components must
be kept at an adequate distance
from flammable, explosive,
combustible, abrasive and dirty
areas or atmospheres.
■ Contact with some parts of the
unit or components can result in
burns or other injuries.
■ Installation, repair and
maintenance work may be
carried out by authorised
specialists only. Visual
inspections and cleaning can
be performed by the operator as
long as power is disconnected
from the equipment.
■ To preclude any danger from the
unit, take appropriate hazard-
prevention measures when
performing installation, repair or
maintenance work or cleaning
the unit.
■ The units and components
should not be exposed to any
mechanical load, extreme levels
of humidity or direct exposure
to sunlight.
Warranty
In order to make warranty claims, it
is essential that the ordering party
or their representative complete
and return the "certificate of
warranty" to REMKO GmbH
& Co. KG at the time when the
equipment is purchased and
commissioned.
The warranty conditions are
detailed in the "General business
and delivery conditions".
Furthermore, only the parties to
a contract can conclude special
agreements beyond these
conditions. In this case, first contact
your contractual partner.
Disposing of packaging
All products are carefully packaged
using environmentally friendly
materials prior to transportation.
You can make a valuable
contribution to reducing waste
and sustaining raw materials by
only disposing of packaging at
approved collection points.
Environmental
protection
and recycling
REMKO BL
4