QVidium QVMP2C-1011 - Manual (Page 26)

User’s Manual v.28 QVidium™ MPEG2+4 Codec
3) Verify that the ESSID is entered correctly, this setting is case-sensitive. You can use
the Scan menu option to display a list of accessible WiFi networks. Figure 4, below,
shows an example of a Scan output. In this example, the scan detected the ESSID
QVidium_1, along with the MAC address and mode (Managed in this example) of that
wireless access point.
Figure 5: WiFi scan output.
When you configure the wireless interface, the MPEG2+4 Codec will automatically add a
default route to match that interface.
You can check on the signal strength by clicking on the Status menu item under the
Wireless
menu.
26 of 45 - Copyright 2007-2008 QVidium™ Technologies, Inc.