System management & logging – QVidium QVMP2C-1011 User Manual
Page 23
User’s Manual v.28
QVidium™ MPEG2+4 Codec
8
System Management & Logging
System Management & Logging
The MPEG2+4 SDI IP Codec includes a number of features to aid in system security and logging.
A Management Configuration page, shown below, allows you to specify the HTTP port for web
access and whether to enable or disable Telnet access. By default, Telnet access is enabled and
allows you to log in as root using the password root.
The MPEG2+4 SDI IP Codec includes a number of features to aid in system security and logging.
A Management Configuration page, shown below, allows you to specify the HTTP port for web
access and whether to enable or disable Telnet access. By default, Telnet access is enabled and
allows you to log in as root using the password root.
Figure 4: Management Configuration web page.
Under Logging, a Syslog Configuration page allows any log messages to be sent to a remote
Linux Syslog Server. When enabled, the system sends any log messages to this remote Syslog
Server specified by the Server IP address. To enable, you must enter the IP address or hostname
of the Syslog server, check the Enable Syslog checkbox, and then click on Set Syslog Server.
Figure 5: Syslog Configuration web page.
23 of 45 - Copyright 2007-2008 QVidium™ Technologies, Inc.