QVidium QVMP2C-1011 - Manual (Page 14)

User’s Manual v.28 QVidium™ MPEG2+4 Codec
Figure 2b: Decoder profile form: “Network Tab”
4. Edit the decoder profile. Five tabbed forms together comprise the complete decoder profile.
These 5 forms, three of which are shown in Figures 2a through 2c, allow configuration of:
video decoding, network configuration, ARQ error correction setup, and configuration of a
remote QVidium video server and a remote QVidium MPEG2+4 Encoder, respectively. Please
refer to Appendix B for a detailed description of each of these parameters.
On the Decoding tab, shown in Figure 2a, enter video Stream Type (Transport or Program),
Video Encoding (MPEG-2 or MPEG-4SP), and Video Format (NTSC or PAL) to match the
encoder’s video settings. You should enter an estimate of the maximum anticipated incoming
bitrate into the Max Stream Bitrate field. Leaving this blank will default to a value of 4 Mbps.
An estimate less than the actual stream bitrate can cause pausing and freezing of the video.
Too large of an estimate will add unnecessary additional delay to the video output.
Figure 2c: Decoder profile form: “ARQ Tab
14 of 45 - Copyright 2007-2008 QVidium™ Technologies, Inc.