QVidium QVMP2C-1011 User Manual
Mpeg2+4 ip codec, User’s manual v.28
This manual is related to the following products:
Table of contents
Document Outline
- Stream Transport Type (Transport or Program): Specifies whether the multiplex the video and audio streams as a single MPEG-2 Transport Stream or an MPEG-2 Program Stream. In both cases, the MPEG-2 Stream Type is independent of the video and audio encoding. You can select either transport type with any of the other audio and video parameters, including choice of video encoding.
- Video Frame Rate (Full Frame Rate and fractions thereof): Select Full Frame Rate for normal video. This will encode the video signal at 29.97 frames per second for NTSC and 25 fps for PAL video format. If you need to produce lower video bitrates, and reducing the resolution is not sufficient or undesired, you can use this feature to sacrifice frame rate for lower bitrates. However, to use thus feature you must select MPEG-4SP encoding and Program Stream transport.