Quantum Composers LDDC 1550 - Manual (Page 26)

12-26 | P a g e
12 Standard Specifications
These specifications are common to both the LDDC and the LSC units. Specifications only
relevant to the LSC unit are shown after the common specifications:
Indoor use in dry conditions only
Ordinary Protection: This product is NOT protected against harmful ingress of moisture.
Class III Equipment (external 15VDC power source)
External Power Supply: Class II (ground connection not required for safety)
o Mains Supply Input: 100-240V ~ 50-60Hz 0.35A
o Output: 15VDC 0.8A
Pollution Degree II (micro-ambient pollution restricted to temporary conductivity caused
by condensation)
Installation (overvoltage) Category II for transient over-voltages
Maximum Relative Humidity: <80%, relative humidity, non-condensing
Operation temperature range of -0
o
C to +40
o
C (+32
o
F to +104
o
F)
Storage and transportation temperature of -40
o
C to +70
o
C (-40
o
F to +158
o
F)
Maximum altitude: 0 to 2000m (6562 ft.)
Weight of the equipment: 0.4kg (0.9lb)
Accessories: External Power Supply (CUI Inc., Model HK-CH12-A15)
MIN TYP MAX UNIT
I/O Configuration
Std DB15
Pulse Mode Options Single Shot, Pulsed, Burst, and CW
Burst Count 1 65535 Pulses
Internal Rate
Generator
Rate 0.1 100,000 Hz
Resolution 100 ns
Accuracy 25 ns
Jitter (pulse to pulse) 1 ns(rms)
Timing
Pulse Width Range 100n 10 s
Width Accuracy
25 ns
Width Resolution 100 ns
Digital Input
Range 0 5 V