Olson Technology OTEB-CW-B - Manual (Page 8)

5
General Safety Instructions
In order to ensure the safe operation and optimal performance of the product, please fol-
low these warnings and cautions in addition to the other information contained elsewhere
in this document.
CAUTION:
Before supplying the power to the instrument, make sure the correct voltage is
used. Failure to use the correct voltage could cause damage to the instrument.
WARNING:
Make sure this instrument is properly grounded. Any interruption of the protective
grounding conductor from the protective earth terminal can result in personal in-
jury.
WARNING:
This device and all parts or components thereof are not meant to be operator ser-
viced, except for the replaceable fuse(s). Refer all servicing to qualified OT person-
nel. To prevent electrical shock, do not remove covers or system components. Any
tampering with or disassembly of the device, parts, or components will void the
warranty and possibly expose the operator to an electrical shock hazard.
WARNING:
DC powered instruments are not meant to be attached to a power source that is ca-
pable of delivering more than 30 Amps or connected to a circuit with a 30 Amp
breaker. Failure to limit the source current to less than 30 Amps can result in opera-
tor injury, voiding of the warranty and/or instrument damage.
WARNING:
Laser radiation is emitted from all optical outputs simultaneously. Avoid exposure
from all unused optical ports.
WARNING:
Do not enable the laser when no fiber or equivalent is attached to the optical output
connector.