Olson Technology OTEB-CW-B - Manual (Page 15)

12
4. Installation Procedure
Overview
This guide is intended to aid a technician or operator in the field with installation and trou-
bleshooting during the installation process. The troubleshooting section is intended to help
determine the cause of any fault, whether it be with the EDFA or some other component in
the network and to determine whether the failure is caused by some configuration error or
faulty connection to the EDFA. Although the technicians may be well versed in trouble-
shooting techniques, they may not be aware of the specific features of the OT EDFA that
can aide in this process.
Specific installation procedures are also found in the operations manual. However, this
guide covers installation and troubleshooting in more detail in an effort to aid the installer
further and for additional reference as needed.
It is assumed the technician is properly trained to handle fiber optics and laser class IIIb
optical equipment.