Nortec SynPur - Manual (Page 4)

Created: 21.12.2006
Changed: 21.03.2007
Printed: 02.03.2009
page 4 of 37
Agreement
This symbol identifies Safety and Hazard Information that could lead to personal
injury and/or property damage if it is ignored. Safety and Hazard Information is also
identified by the term ATTENTION.
This symbol identifies important information. This information is also identified by
the term IMPORTANT.
This symbol is found on the nameplates of all devices. It is intended to remind you
to read the Technical Document before handling any of the equipment. If anything
is still unclear after reading the document, please contact the Technical Customer
Support department of the manufacturer before handling the equipment in any
way.
Definitions
Untreated water:
Drinking water or tap water.
RO water:
Reverse osmosis water (or pure water) is water that has been partially
demineralized in the pure water system RO water is also necessary as a
preliminary stage for the smooth operation of the SynPur.
DI water:
Fully deionized water contains no minerals. In plants that produce deionized water,
this water can be connected to the SynPur.
DM water:
In the Synthesizer cartridge the last minerals are extracted from the RO water. This
demineralized water is conditioned in the SynPur with an additive and is suitable
for the humidification of „clean rooms,“ etc.
Additive:
The additive is a gas (carbon dioxide) used to condition the DM water to enable
humidification with DM water.
Synthesizer cartridge:
The Synthesizer cartridge contains a resin solution formulated especially for
DRAABE for the production of DM water.
Document Storage
Please keep this Technical Document readily accessible in a safe place. If the
document is ever lost, please contact NORTEC.
Languages
This Technical Document is available multiple languages. Please contact NORTEC
with related questions.
!