Nortec SynPur - Manual (Page 27)

Created: 21.12.2006
Changed: 21.03.2007
Printed: 02.03.2009
page 27 of 37
5.3 Checks/regular service
Regular service
SynPurPur: Aside from the inspections described here, the container is subject to regular
service. The operational safety as well as the hygienically clean function
depend on regular service. The manufacturer recommends a service cycle of 6 to 8
months. Service must be performed by the manufacturer. Only the manufacturer
has special test equipment at his disposal, has the required knowledge to perform
the necessary work and enters into a commitment towards the user by performing
the service.
Note to purchasers (byer) of SynPur: For the duration of the 24-month warranty
period, the user is obliged to comply with the above mentioned service cycle.
Failure to comply may render the warranty null and void. Should a functional defect
of the SYNPUR occur during the 24-month warranty period, warranty claims will
only be accepted by Draabe, if the described service intervals for the SYNPUR
have been complied with, i.e., if regular service has not been performed on the
SYNPUR at max. time intervals of 8 months, the warranty of the SYNPUR will be
rendered null and void.
Transport costs are the responsibility of the user. Service costs must be paid by
the user (the user receives a report of service work performed as well as a
guarantee for exchanged arts). For the time of service work (2-3 weeks) the user
will receive a rental unit. The cost of the rental unit is included in the service costs.
Regular service is also recommended after the expiry of the warranty period.
Note to lessees (rental) of SynPur: The manufacturer is responsible for the
above mentioned service cycle. Transport costs for the return from the user to the
manufacturer are charged the responsibility of the user. Service costs are included
in the lease.
Whenever inspections reveal something suspicious or any case of incorrect
functioning, the DRAABE customer service are to be notified at once! Inspection
work may only be carried out by properly instructed persons. The operator
(customer) is responsible for checking that the inspectors are suitable for the task
and are instructed properly.