Niveo Professional NWAR33P - Manual (Page 98)

98
Secondary DNS: Enter the secondary DNS.
Connection: Click on Always on to establish a PPPoE session during start up and to
automatically re-establish the PPPoE session when disconnected by the ISP. You may uncheck
the item to disable this function.
Idle Timeout: Auto-disconnect the broadband firewall gateway when there is no activity on the
line for a predetermined period of time.
MTU: Control the maximum Ethernet packet size your PC will send.
IPv6: Check to enble IPv6 function.
IPv6 Address: Enter the IP address of the default gateway. Default is "::", which obtains IPv6
address automatically.
Obtain IPv6 DNS: Click to activate DNS and to enable the system to automatically detect DNS.
Primary DNS / Secondary DNS: Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and the netmask.
MPoA Connection (ADSL)
Description: A given name for the connection.
VPI/VCI: Enter the VPI and VCI information provided by your ISP.
Encap. method: Select the encapsulation format. Select the one provided by your ISP.
NAT: The NAT (Network Address Translation) feature allows multiple users to access the
Internet through a single ISP account by sharing a single IP address. If users on your LAN have
their own public IP addresses to access the Internet, NAT function can be disabled.