Niveo Professional NWAR33P - Manual (Page 43)

43
VPI/VCI: Enter the information provided by your ISP.
Username: Enter the username provided by your ISP. You can input up to 256 alphanumeric characters
(case sensitive).
Password: Enter the password provided by your ISP. You can input up to 32 alphanumeric
characters (case sensitive).
Encapsulation method: Select the encapsulation format. Select the one provided by your ISP.
Authentication method: Default is Auto. Please consult your ISP on whether to use Chap, Pap or
MSCHAP.
IP Address: Your WAN IP address. Leave the IP address as 0.0.0.0 to enable the device to
automatically obtain an IP address from your ISP.
Obtain DNS automatically: Click to activate DNS and to enable the system to automatically
IPv6 Address: Enter the IPv6 Address. Remain the default "::" to obtain an IPv6 address automatically.
Obtain IPv6 DNS Automatically: Click to activate DNS and to enable the system to automatically detect
DNS.
Primary DNS / Secondary DNS: Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the netmask
IPoA Connection
VPI/VCI: Enter the VPI and VCI information provided by your ISP.