Niveo Professional NWAR33P - Manual (Page 123)

123
PPTP Client
Name: Type the name.
WAN Port: Default is “Default”. Or you can select “EWAN” or “ADSL” from the drop-down menu.
Username: Type the Username given.
Password: Enter the Password.
Auth. Type
: Select an authenrication protocol.There are 4 types to be selected: “Pap or Chap”,
“Pap”, “Chap”, and “MS-CHAPv2”. The type of “MS-CHAPv2” enable you to set the Encryption
Key Length and Peer Encryption Mode.
PPTP Server Address: Enter the PPTP Server Address.
Connection Type
: click “Remote Access” or “LAN to LAN” to setup the connection type.
Time to Connect
: The connected time could be set as “Aways” or “Manual”.
Peer Network IP: Enter Peer Network IP.
Peer Netmask: Enter the Peer Netmask.
Click “Add” to apply the settings.