Example: iptv service setting – Niveo Professional NWAR33P User Manual

Page 138

Text mode
Original mode

138

Example: IPTV Service Setting

Go to Advanced mode > Configuration > WAN > WAN Profile. Add a new WAN profile using the
Pure Bridge protocol. Information should be provided by your local service provider.

Note: Description name should not contain any space.

Then go to Advanced mode > Configuration > Advanced > VLAN. Then configure a port that will
use the IPTV application. The example below is a setting that illustrates that only Ethernet port
#4 can connect to STB and use IPTV.

Note: The VLAN setting illustrated bridges both WAN Profile and the Ethernet Port 4 so
that the Ethernet port can connect to STB and get the IP directly from the IPTV Service
Network. Thus, Ethernet port 4 can no longer be used for internet access and WEB
management.