Niveo Professional NWAR33P User Manual
Page 56
56
IP Address: Your WAN IP address. If the IP is set to 0.0.0.0 (auto IP detect), both netmask and
gateway may be left blank.
Netmask: User can change it to others such as 255.255.255.128. Type the netmask assigned
to you by your ISP (if given).
Gateway: Enter the IP address of the default gateway.
Obtain DNS automatically: Click to activate DNS and to enable the system to automatically
detect DNS.
Primary DNS / Secondary DNS: Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and the netmask.
IPv6: Check to enble the function.
IP/Prefix Length: Enter IP Address and Prefix Length.
IPv6 Gateway: Enter the IPv6 address of the default gateway.
Primary DNS / Secondary DNS: Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and the netmask.
Click Apply to confirm the settings.