Niveo Professional NWAR33P - Manual (Page 116)

116
Internal Port: This Port or Port Range defines the ports allowed to be used by the
Remote/WAN to connect to the application. Default is set from range 1 ~ 65535. It is
recommended that this option be configured by an advanced user.
External Port: This is the Port or Port Range that defines the application.
Direction: Determine whether the rule is for outgoing packets or for incoming packets.
Time Schedule: A self defined time period. You may specify a time schedule for your
prioritization policy. For setup and detail, refer to Time Schedule section.
Log: Select Enable for this option if you will like to capture the logs for this Packet filter policy.
Add: Click this button to add a new packet filter rule and the added rule will appear at the
bottom table.
Edit: Check the Rule No. you wish to e
dit, and then click “Edit”.
Delete: Check the Rule No. you wish to delete, and then click “Delete”.
Reorder: Be aware that packet filtering parameters appear in priority order i.e. the first one
takes precedence over all other rules. There is a sort function next to the Rule Name column,
you can move the rule to higher or lower priority by clicking the Order arrow, and press
“Reorder” to save the new priority.
Ethernet MAC Filter
A MAC (Media Access Control) address is the unique network hardware identifier for each PC
on your network‟s interface (i.e. its Network Interface Card or Ethernet card). Using your router‟s
MAC Address Filter function, you can configure the network to block specific machines from
accessing your LAN.