Niveo Professional NWAR33P User Manual
Page 106
106
Step 2: Select Pure Bridge mode, Enable VLAN MUX, set 802.1Q VLAN ID 200, Click Add
Step 3: Now go to Configuration > Advanced > VLAN, start to set VLAN. Select Port Based
VLAN Type, set VLAN Group Name VLAN 200, select port 1 to join in this VLAN group and link
this VLAN group to eth0.200 as follows.
Here you have finished your wanted configuration. The port 2-4 and VLAN are automatically
perceived as VLAN 100. Thus, you only need to configure VLAN 200 for IPTV application,
through VLAN, you can separate the traffic easily and have a wonderful video expericence.