NavCom StarUtil Rev.E - Manual (Page 9)

STARUTIL User Guide Rev. E
they may access additional menu screens that allow setup of such items as the internal radio, or L-
Band Module.
Receiver Initial Position
After removing the receiver from the box and powering up, the position first seen may be the
location of the NavCom Technology, Inc. production center. It is recommended that this position
be changed to a position within 500km of your actual location in order to quickly acquire satellites
and receive a new almanac from the GPS system.
Viewing Output Messages
Only a limited number of the many NCT2000D output messages can be viewed within the utility.
These can be found under the "View" menu of the main StarUtil window. When a message is
checked on this menu, a screen with a selection tab will be created in the main workspace window
and displaying for the corresponding message. If you wish, you can remove the screen from the
main workspace window by dragging the tab and placing it anywhere on the Windows
®
desktop.
This will make the display a freestanding window. If you wish to put it back, simply drag the
window frame back to the StarUtil main workspace window.
Initiating Data Logging
You can create a log file of the messages from the receiver by selecting "File\Logging..." from the
main StarUtil window menu. Simply select a folder and enter a file name to begin logging. A folder
named in year, month, day [yymmdd] format will be created under the chosen folder, and the
logged data will be placed there. To stop logging, select "File\Close log" from the main StarUtil
window menu.
1 – 8