NavCom StarUtil Rev.E - Manual (Page 48)

STARUTIL User Guide Rev. E
Chapter 10 Ack/Nacks & General Commands
This section details fundamental response sent back from the unit whenever a request for
information is seen at the receiver. It also covers several “Get” actions that could prove useful in
setting up other systems.
Ack/Nack
To set the Ack/Nack Logical Port, go to the main StarUtil menu and click RECEIVER\SETUP\SELECT
ACK/NACK RESPONSE PORTS, as shown in Figure 58.
Figure 58: Select Ack/Nack Logical Ports Location
Once here the window in Figure 59 will appear allowing you to select which port the responses
from the receiver are heard on. This permits greater flexibility when determining if a message was
actually received by the receiver. The receiver response can be ported somewhere other than the
Control port.
Figure 59: Select Ack/Nack Logical Ports
10 - 45