Chapter 7 data logging, External nct binary logging, Figure 37: nct external logging menu location – NavCom StarUtil Rev.E User Manual
Page 36: Figure 38: external logging setup
STARUTIL User Guide Rev. E
Chapter 7
Data Logging
Data can be logged from either of the physical ports, or to the on board 64 Megabyte Memory
Module Card (MMC). This data can be used in a number of industry standard GPS data analysis
programs either in NCT Binary format, after being converted to RINEX format, or by using the
NMEA output.
External NCT Binary Logging
Once the receiver is setup and navigating to your specifications, go to the main StarUtil menu and
click FILE\LOG DATA TO FILE as shown in Figure 38.
Figure 38: NCT External Logging Menu Location
Once you click on this item, the window in Figure 39 will appear. This window not only allows for
immediate data logging, but also allows for automatic 24-hour data file splits.
Figure 39: External Logging Setup
7 - 33