Installation (cont.) – MovinCool CMW30 User Manual
Page 29
29
INSTALLATION (cont.)
Supplied Wall Mounted Controller Connection (cont.)
6. Select the proper location where the controller can be conveniently accessed.
Install the controller assembled in step 5. to the wall with supplied four (4)
screws through the holes.
CAUTION: Do not install the controller where artificial heating
condition may occur (i.e.hot stove, hot pipe, fireplace or under
direct sunlight).
7. Reassemble the front cover.
8. Strip the end of the shield wire of the wall mounted controller.
HOLES
PART NUMBER
LABEL
ILL00298-00
ILL00299-00