Installation (cont.) – MovinCool CMW30 User Manual
Page 27
27
INSTALLATION (cont.)
Supplied Wall Mounted Controller Connection (cont.)
2. Remove four (4) screws from the back cover.
3. Connect the supplied shield wire (12 feet) to the 3-pin connector on the
controller board.
CAUTION: To avoid static electricity, do not touch the solder joints
or the none-insulated parts on the controller board.
SCREWS (4)
MODEL NAME
LABEL
BACK COVER
ILL00293-00
SHIELD WIRE
3-PIN CONNECTOR
ILL00294-00