Montigo H38DF - Manual (Page 27)

Page 27 XG0147 - 150204.1
H*38DF Gas Fireplace
Installation
Optional Cultured Rocks
The HL38DF* has the option of installing the cultured rocks which mimic
real stone. These may be spaced at random or in a visual pattern of your
preference in the burner tray. See the Montigo web site for photographs
and ideas.
www.montigo.com
Installing Firestones in Natural Gas and Propane Fireplaces
The HL38DF* fireplace is supplied with firestones. Remove the Door
as shown on page 22. Follow these instructions to ensure all parts
are removed or replaced as required. Once the glass door is removed
place the firestones randomly across the pan as described in Figure
28 to 28a.
.
Figure 28. Completed firestone installation. Second Gen burner
shown.
(Note: DO NOT place ANY firestones on top of the burners or pilot).
Figure 28a. Operating gas fireplace with firestones surrounding
burner tray.
CAUTION!
DO NOT COVER THE BURNERS or PILOT
Rock Guard
Burner Tray
2. Remove lava rocks from lava tray and remove lava tray from around
the burner.
Figure 29b. Burner without tray.
Designer River Rocks - Converting from H38DFN* to
HR38DFN*:
To convert your H38DF fireplace to an HR38DF unit with designer river
rocks, follow these instructions:
Kit Contents:
1. Remove existing ceramic logs from H38DF unit.
Figure 29a. Firebox with logs prior to ceramic fibre rock
installation.
Rock Guard
Burner Tray
River Rocks
Figure 29. Kit Contents
Note: Designer River Rock is approved for NG units only.