Metz MECABLITZ 58 AF-2 digital Pentax User Manual

Page 125

125

7.5 Adjusting exposure format (Zoom Size)

With some digital cameras it is possible to adjust the light angle of the main

reflector to suit the chip format (the dimensions of the image recording module).
• When „Size ON“ appears, Zoom Size is activated.

The reflector position display is adjusted to the image format of the digital

cameras.

• When „Size OFF“ appears, Zoom Size is deactivated.

The display of the reflector position is shown in small picture format (24 x 36).

Setting procedure:

• Press the

button repeatedly until „Select“

appears on the display.

• Select the menu option „ZoomSize“ by pressing the

and

keys. The selected menu option will be

highlighted.

• Confirm the selection of the special function by pres-

sing the

button.

• Select the desired setting with the

and

keys. The setting takes effect immediately.

• Press the button

repeatedly until the screen is

reset to its normal view. If the button

is not pres-

sed, the display is automatically reset to its normal

view after about 5 seconds.

Once the Zoom Size mode is activated,

„SZoom“ will appear on the display next to

the focal length.

Refer to your camera’s instruction manual for further information.

☞

Set

Sel

7.6 Cordless remote mode (Remote)

• When „Remote OFF“ appears, the cordless remote mode is deactivated.
• When „Remote Master“ appears, the flash unit is operating as a guiding

master flash unit on the camera.

• When „Remote Slave“ appears, the flash unit is operating completely as a sla-

ve flash unit. See also Section 19.

Setting procedure:

• Press the

button repeatedly until „Select“

appears on the display.

• Select the „Remote“ menu option by pressing the

and

keys. The selected menu option will be

highlighted.

• Confirm the selection of the special function by pres-

sing the

button.

• Select the desired setting with the

and

keys. The setting takes effect immediately.

• Press the button

repeatedly until the screen is

reset to its normal view. If the button

is not pres-

sed, the display is automatically reset to its normal

view after about 5 seconds.

Set

Sel

F 5.0

SZoom 35

10 m

ISO 200

TTL

SZoom

Select

Zoom Ext

m/ft

Zoom Size

Set

☛

Size ON

Set

☛

Select

BEEP

Remote

Set

☛

Remote

Master

Set

☛

Para

Sel

CH1

Master

AZoom 35

F32

TTL

709 47 0237.A1 58AF-2 Pen/Sam 27.07.2010 15:17 Uhr Seite 125