Metz MECABLITZ 58 AF-2 digital Pentax User Manual

Page 123

123

Beep signals when adjusting automatic mode settings:
• A short beep signal as an alarm in automatic mode indicates that the apertu-

re and ISO settings exceed the permissible light control range. The auto aper-

ture of the mecablitz is then automatically adjusted to the next permissible

value.

Setting procedure:

• Press the

button repeatedly until „Select“

appears on the display.

• Use the

and

buttons to select „BEEP“ from

the menu. The selected menu item will be highlighted

against a dark background.

• Press the

button to confirm the special func-

tion selection.

• Choose the setting desired using the

and

arrows. The setting takes effect immediately.

• Press

repeatedly to return the display to its nor-

mal reading. If the key

not pressed, the display

will switch back to normal automatically after

approximately 5 seconds.

When the beep function is turned on,
the symbol is also displayed on the
LC display.

☞

Set

Sel

7.3 Flash Bracketing Series (FB)

A series of flash exposures (flash-bracketing FB) can be carried out in the

and automatic

flash modes. A flash bracketing series consists of

three successive flash shots with different flash exposure correction values.
When a flash bracketing series is set, FB and the correction value appear on the

display. The possible correction values range from 1/3 to 3 apertures in one-

third aperture increments.
Setting procedure:

• Press the

button repeatedly until „Select“

appears on the display.

• Select the menu option „FB“ by pressing the

and

buttons. The selected menu option will be high-

lighted.

• Confirm the selection of the special function by pres-

sing the

button.

• Select the desired setting with the

and

but-

tons. The setting takes effect immediately.

• Press the button

repeatedly until the screen is

reset to its normal view. If the button

is not

pressed, the display is automatically reset to its

normal view after about 5 seconds.

Set

Sel

TTL

Select

Remote

Beep

Set

☛

Set

☛

F 4.0

MZoom 24

10 m

ISO 200

TTL

Select

Remote

Standby

Set

☛

Set

☛

709 47 0237.A1 58AF-2 Pen/Sam 27.07.2010 15:17 Uhr Seite 123