Metz MECABLITZ 58 AF-2 digital Pentax User Manual
Page 120
120
ķ
6.1 Setting procedure for the flash parameters
When a button is pressed for the first time, the LC display is illuminated.
Depending on the flash mode set, various flash parameters are shown in the
menu: For cameras with digital data transfer, the flash parameters for aperture
(F), lens focal length (Zoom), and light sensitivity (ISO) are automatically set on
the flash unit. The flash parameters for aperture (F) and light sensitivity (ISO)
cannot be changed.
• Press the
button (Parameters) until the desired flash parameter (see
below) appears on the LC display.
The following parameters are available:
• Set the desired value using the
and
buttons. The setting takes effect
immediately.
• Press the button
to change the LC display back to the normal view. If the
button
is not pressed, the display will change back to the normal view
after about 5 seconds.
Depending on the system, the aperture setting will not be shown on the
display of the flash!
☞
–
+
Para
☞
6.2 Main reflector position (Zoom)
If there is no digital data transfer between the camera and flash unit, the reflec-
tor positions
24 mm - 28 mm - 35 mm - 50 mm - 70 mm - 85 mm - 105 mm (35mm format
24 x 36) can be set manually.
MZoom will then appear in the LC display.
Setting procedure:
• Press the
button (Parameters) until „Zoom“
appears on the LC display.
• Set the desired value using the
and
but-
tons. The setting takes effect immediately.
• Press the button
to change the LC display back to
the normal view. If the button
is not pressed, the
display will change back to the normal view after
about 5 seconds.
During digital data transfer between the camera and
flash unit, the main reflector positions are adjusted
automatically.
AZoom will then appear in the LC display.
–
+
Para
—
TTL/P-TTL/
P-TTL-HSS/A/SB
—
—
Zoom
EV
—
M/M HSS
—
P
Zoom Zoom
—
N
Number of strobe flashe
Table 1
Strobe flash frequency
Manual partial light output
Mainreflektor position
Manual flash exposure correction
f
P
—
F 8.0
MZoom 70
11 m
ISO 200
A
Para
–
+
☛
F 8.0
MZoom 35
8,7 m
ISO 200
A
Para
–
+
☛
709 47 0237.A1 58AF-2 Pen/Sam 27.07.2010 15:17 Uhr Seite 120