Measurement Computing E-PDISO16 - Manual (Page 26)

E-PDISO16 User's Guide Specifications
Ethernet and input filter "Factory Default" settings
Table 8. Factory default specifications
Default IP address 10.0.2.251
Default IP mask 255.255.255.252
Default Gateway 10.0.2.1
Default DHCP setting
Enabled
Default Filter setting All Filters Off
LED displays and the "Factory Default" button
Table 9. LED and button configurations
POWER LED 6.0 V < V
ext
< 12.5 V On
V
ext
<6.0 V
,
V
ext
> 12.5 V Off (power fault)
TEST LED Blinks when commanded to by software.
LINK LED On when there is a valid Ethernet connection.
ACTIVITY Blinks when an Ethernet packet is sent or received.
Factory default button Returns the device to its factory default condition including resetting all Ethernet, filter
and relay conditions.
Mechanical
Table 10. Mechanical specifications
17.0" (L) x 4.8" (W) x 0.8" (H) Card dimensions
431.8 mm (L) x 121 mm (W) x 20.3 mm (H)
17.2" (L) x 5.2” (H) x 1.6” (H)
Case dimensions
436.9 mm (L) x 132.1 mm (W) x 40.6 mm (H)
Environmental
Table 11. Environmental specifications
Operating temperature range 0 to 70 °C
Storage temperature range -40 to 100 °C
Humidity 0 to 95% non-condensing
Main connector
Table 12. Main connector specifications
Connector type Screw terminal
Wire gauge range 14-30 AWG
5-3