Power consumption, External power output, Ethernet compliance – Measurement Computing E-PDISO16 User Manual
Page 25: Ethernet connection, Eeprom memory, Power consumption -2, External power output -2, Ethernet compliance -2, Ethernet connection -2, Eeprom memory -2

E-PDISO16 User's Guide
Specifications
Power consumption
Table 3. Power consumption specifications
External power input
6.0 VDC to 12.5 VDC (9 VDC
power supply provided)
External power supply (included)
MCC p/n CB-PWR-9V3A
9 V ±10% @ 3 A
All relays off, Ethernet idle
250 mA typical, 320 mA max.
All relays on, Ethernet idle 1.3
A
typical, 1.6 A max.
Operating current
All relays on, Ethernet active
1.45 A typical, 1.7 A max.
Note 1:
The E-PDISO16 monitors the external power supply with a voltage supervisory circuit. If this
power supply exceeds the supervisor limits, the POWER LED will turn off, indicating a power
fault condition.
External power output
Table 4. External power output specifications
Parameter Conditions Specification
External power output - current range
See Note 2
4.0 A max.
External power output - voltage range
The input voltage minus the output
voltage at the daisy chain output.
0.5 V max.
Compatible cable(s) for daisy chain
C-MAPWR-x
x = 2, 3, or 6 feet
Note 2:
The daisy chain power output option allows multiple Measurement Computing boards to be
powered from a single external power source in a daisy chain fashion. The voltage drop between
the module’s power supply and the daisy chain output is 0.5 V max. Users must plan for this drop
to ensure the last module in the chain will receive at least 6.0 V.
Ethernet compliance
Table 5. Ethernet compliance specifications
Device type
IEEE 802.3 Ethernet 10/100Base-T
Device compatibility
IEEE 802.3-2003 10/100 Media Access Control
Ethernet connection
Table 6. Ethernet connection specifications
Ethernet type
10Base-T, 100Base-T
Connector
RJ-45, 8 position
Cable
CAT-5 shielded, unshielded twisted pair
Length
100 meters max.
Max connections
3 (one control port and two monitoring ports)
MAC address
00:12:71:XX:XX:XX
EEProm memory
Table 7. EEProm memory specifications
EEProm memory
1024 bytes residing in the processor
Reserved space
128 bytes, Address 0x00 to 0x7F
User space
896 bytes, Address 0x80 to 0x3FF
5-2