Measurement Computing WBK20A - Manual (Page 16)

Windows 2000
2-10 Windows 2000 04-02-02 WBK20A, PCMCIA/EPP Interface Card
This completes the Windows 2000 Software setup for the WBK20A. You will need to reboot the computer
with the card installed.
The WBK20A is not a “Hot-Swap” card. To ensure proper operation of the WBK20A
card, boot up the computer only after verifying that the WBK20A is inserted in the PC’s
card slot. Failure to do so may prevent the application software from recognizing the
card as a parallel port device.
Reference Note:
In regard to connecting the WBK20A to the WaveBook or DaqBook, refer to chapter 3,
Connecting the WBK20A to Hardware .