Measurement Computing Personal488 rev.1.0 - Manual (Page 25)

Windows 2000 & Windows XP
Personal488 for Windows 95/98/Me/NT/2000/XP 889496 Installation 3-15
13. Click Next.
Windows 2000 will install software
for the device.
If Windows could not detect any
hardware settings for the device, a
message box informs you that
hardware settings must be entered
(see the following figure).
14. If Windows could not detect any
hardware settings, as indicated by the
message in step 14, enter the settings.
Refer to Hardware Configuration
Reference (chapter 4) for setting
information.
15. When prompted that “Windows is
ready to install drivers for your new
hardware,” click Next.
Windows will inform you that the hardware was installed.
16. Click Finish.
Now proceed to the next section, Hardware Installation for Windows 2000 and Windows XP Users.