Measurement Computing ZonicBook Rev.3.0 - Manual (Page 28)

Getting Started, pg. 24 11-01-01 ZonicBook
ZonicBook Specifications
General Specifications
Environment
Operating: 0° to 50°C, 0° to 95% RH, non-condensing
(ZonicBook only)
Storage: -20° to 70°C
Power Consumption: 8.5 watts max with +12 VDC power
supply
Input Power Range: 9 to +15 VDC
Dimensions: 279 mm W x 216 mm D x 35 mm H
(11” x 8.5” x 1.375”)
Weight: 1.32 kg (2.9 lbs)
PC-Card (included): Requires one type III slot
PC-Card to ZonicBook Cable (included): 30 in.
Analog Inputs
Input Channels: 4, 8, or 16*
Input Connector: BNC
A/D: One 16-bit Sigma Delta converter per channel
Sampling: All input channels are sampled simultaneously,
up to 51.2 kHz max per channel
Digital Decimation Filter: 92 dB stop-band attenuation
Dynamic Range: >80 dB typ
Amplitude Flatness: 1 dB typ
Bipolar Ranges: 25 mV to 25V full scale in 1.5 dB steps
Maximum Overvoltage: ±80 VDC
Input Bandwidth:
4- and 8-Channel ZonicBook: DC to 20 kHz
16-Channel ZonicBook: DC to 10 kHz
Input Coupling: AC, DC; switch selectable, per channel
AC Coupling: 1.6 Hz; -3 dB point
ICP Voltage (@ 4 mA): 24V ±.5V (no load), 20V bias max
Input Impedance
Single-Ended: 1M Ohm in parallel with 30 Pf
Differential: 2M Ohm in parallel with 30 Pf
Accuracy: 25 mV to 25V; ±2% (±0.2 dB)
Channel Match: +1 dB amplitude, +1° phase
Input Noise: ^ ±3 LSB (RMS)
Total Harmonic Distortion: -62 dB typ
Signal to Noise and Distortion: -60 dB typ
Cross Talk: < 75 dB max; relative to full scale
Anti-Alias Filters: 80 dB alias rejection
Output Characteristics
Number of Channels: 1 BNC output per ZonicBook
Output Frequency Range: 2 kHz
Dynamic Range: 80 dB typ
Frequency Resolution: 0.001 Hz
Frequency Accuracy: 100 ppm
Amplitude Accuracy: 2.0% @ 1V; up to 1 kHz
Maximum Amplitude: 2.8V peak-peak
DAC Resolution: 16-bit Sigma Delta
Processing Characteristics
Analysis Frequency: 10 Hz to 20 kHz for 4- or 8-channel
ZonicBooks; 10 Hz to 10 KHz for 16-channel ZonicBook;
All input channels are sampled synchronous; Analysis
Rate is set for all channels
Blocksize: 128 to 16,384 data samples per block of data
(in powers of 2)
FFT Windows
Response Channels: None, Hanning, Flat Top,
Exponential, 3 Term Blackman Harris
Force Channels: None, Rectangular, Cosine Taper
Integration/Differentiation (in frequency domain):
Single and Double Differentiation; Single and Double
Integration
Averaging: Linear, Exponential, Negative, Peak Hold,
Time Synchronous
Acquisition Triggers: Free Run
User-Programmed Trigger: Level and Slope,
Time and Date, Pre or Post data trigger delay
Octave Filter: A, B, and C Weighting
Display Types: Time, Trend, Auto Spectrum, Cross
Spectrum, Spectrum, FRF, PSD, Transfer Function, 1/3
Octave, Full Octave, Coherence
Transfer Function Types: Inertance, Mobility,
Compliance, Apparent Mass, Impedance, Dynamic
Stiffness
Octave Types: 1/3, Full