Measurement Computing ZonicBook Rev.3.0 - Manual (Page 21)

ZonicBook 11-01-01 Getting Started, pg. 17
Windows95/98 Users
Prior to installing the drivers, be sure that your ZonicBook system is
properly connected and powered.
1. Insert the DSP-Card card into your computer’s PCMCIA slot 0. Windows will start the
Hardware Wizard.
2. After the dialog box appears, click .
3. Verify “Search for the best driver for your device” is selected.
4. Click .
5. Put a check mark next to “Specify a location.”
6. Click ; expand the CD-ROM drive node; then locate and open the“Win95-98”
folder. See following figure.