Measurement Computing ZonicBook Rev.3.0 User Manual

Page 23

Text mode
Original mode

ZonicBook

11-01-01

Getting Started, pg. 19

Verifying the DSP-Card has been Correctly Installed,

for Windows 95/98/Me

You can either of two methods to verify that your DSP-card has been correctly installed. Although the
screen shots were taken from Windows 98, the steps for Windows 95 and Windows Me are essentially the
same as those provided below.

The “PC-card” Icon Method

1. From the Windows Desktop, click .

2. Click Settings.

3. Click Control Panel.

4. In the Control Panel, locate and double-click on the PC-card icon.

At this point you should see a dialog box similar to following. The box identify the DSP-card
and its associated PCMCIA socket.

This completes the PC-card icon method.