Measurement Computing Digital488 - Manual (Page 59)

Section 3 Command Descriptions
3.29
Terminator Yn
The IEEE 488 bus terminator defaults at power-on to the settings on Switch S1 It
also may be programmed for any combination of Carriage Return (CR) and Line Feed (LF).
The Y0 mode is the most commonly accepted terminator, CR-LF. Y1 reverses the
sequence to send LF-CR. Y2 sends CR only and Y3 sends LF only.
Y0 CR LF
Y1 LF CR
Y2 CR only
Y3 LF only
Example:
CLEAR 718
OUTPUT 718;"Y3X"
select line feed terminator