Measurement Computing Digital232 - Manual (Page 15)

Section 2 Getting Started
2.7
2.2.6 Serial Echo Selection
Serial data sent to the Digital232 will be echoed back to the serial host if S2-5
is set to the open position. Factory default is Echo Disabled.
S2 View for Echo
2.2.7 Serial Parity Selection
Serial Parity is selected with S2-6 through S2-8. The Digital232 generates the
selected parity during serial transmissions but it does not check parity on data
received. The factory default is parity disabled.
S2 View for Serial Parity Selection
2.3 Digital Input/Output Ports
The Digital232 has 40 data lines which can be programmed in groups of 8 as