Measurement Computing USB-7204 - Manual (Page 6)

6
Chapter 1
Introducing the USB-7204
The USB-7204 is a USB 2.0 full-speed device that provides the following features:
 Eight channels of 16-bit analog input configurable for eight 11-bit single-ended inputs (represented as
12-bit data — even values only) or four 12-bit differential inputs.
 Two 12-bit analog outputs
 16 individually configurable digital I/O channels
 32-bit event counter
 Digital trigger input
 Bidirectional SYNC pin for external clocking and synchronization with another board
The USB-7204 device is compatible with both USB 1.1 and USB 2.0 ports. The speed of the device may be
limited when using a USB 1.1 port due to the difference in transfer rates on the USB 1.1 versions of the
protocol (low-speed and full-speed).
The USB-7204 is powered by the +5 volt USB supply from your computer; no external power is required. A
USB cable is shipped with the device.
Caution! There are no product safety, electromagnetic compatibility (EMC), or CE marking compliance
claims made for the USB-7204. The USB-7204 is intended for use as a component of a larger
system. MCC can help developers meet their compliance requirements. The end product supplier,
however, is responsible for conforming to any and all compliance requirements.