Measurement Computing CB-COM-7013 - Manual (Page 37)

37
CB-7013, CB-7033 User’s Manual
2.20 ~AA3EVV
Description: Set Host Watchdog Time-out Value
Syntax: ~AA3EVV[CHK](cr)
~
Delimiter character.
AA Address of setting module (00 to FF).
3 command for set host watchdog time-out value.
E 1=Enable/0=Disable host watchdog.
VV Time-out value, from 01 to FF, each for 0.1 second.
Response: Valid Command: !AA[CHK](cr)
Invalid Command: ?AA[CHK](cr)
Syntax error or communication error may get no
response.
! Delimiter for valid command.
? Delimiter for invalid command.
AA Address of response module (00 to FF).
Example:
Command: ~013164
Receive: !01
Set address 01 enables host watchdog and time-out value is
set to 64 (10.0 seconds); returns successful.
Command: ~012 Receive: !0164
Read address 01 host watchdog time-out value. Return 64,
the time-out value is 10.0 seconds.
Related Command:
Sec. 2.16
~**, Sec. 2.17 ~AA0, Sec. 2.18 ~AA1, Sec. 2.19 ~AA2
Related Topic:
Sec. 3.2
Module Status; Sec. 3.3, Dual Watchdog Operation