Measurement Computing CB-COM-7013 - Manual (Page 32)

32
CB-7013, CB-7033 User’s Manual
2.15 ~AAEV
Description: Enable/Disable Calibration
Syntax: ~AAEV[CHK](cr)
~
Delimiter character
AA Address of setting module (00 to FF)
E Command for enable/disable calibration
V 1=Enable/0=Disable calibration
Response: Valid Command: !AA[CHK](cr)
Invalid Command: ?AA[CHK](cr)
Syntax error or communication error may get no
response.
! Delimiter for valid command.
? Delimiter for invalid command.
AA Address of response module (00 to FF).
Example:
Command: $010
Receive: ?01
Perform addreess 01 span calibration, return not enable
calibration.
Command: ~01E1 Receive: !01
Set address 01 to enable calibration, returns successful.
Command: $010 Receive: !01
Preform address 01 span calibration, returns successful.
Related Command:
Sec. 2.5,
$AA0; Sec. 2.6, $AA1
Related Topic:
Sec. 1.8,
Calibration