Marantz SR6008 - Manual (Page 217)

217
Tips Settings Playback Connections Contents
Front panel Display Rear panel Index Remote
Appendix
Sound modes and channel output
S This indicates the audio output channels or surround parameters that can be set.
D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.” (vpage 174).
Sound mode (vpage 108)
Channel output
Front L/R Center Surround L/R Surround back L/R Front height L/R Front wide L/R Subwoofer
DIRECT/PURE DIRECT (2-channel) S Dz4
DIRECT/PURE DIRECT (Multi-channel) S D D Dz1 Dz1 Dz1 D
DSD DIRECT (2-channel) S Dz4
DSD DIRECT (Multi-channel) S D D D
STEREO S D
MULTI CH IN S D D Dz1 Dz2 D
DOLBY PRO LOGIC gz S D D D D
DOLBY PRO LOGIC gx S D D D D
DOLBY PRO LOGIC g S D D D
DOLBY PRO LOGIC g A-DSX S D D Dz3 Dz3 D
DTS NEO:X S D D D D D D
Audyssey DSX® S D D Dz3 Dz3 D
DOLBY DIGITAL S D D D Dz2 D
DOLBY DIGITAL Plus S D D Dz1 Dz1 Dz1 D
DOLBY TrueHD S D D Dz1 Dz1 Dz1 D
DTS SURROUND S D D D Dz2 D
DTS 96/24 S D D D Dz2 D
DTS-HD S D D Dz1 Dz1 Dz1 D
DTS Express S D D D Dz2 D
MULTI CH STEREO S D D D D D D
VIRTUAL S D
z1 A signal for each channel contained in an input signal is output as audio.
z2 Audio is output when the set sound mode name contains “+PLgz”.
z3 Audio is output from the speakers specified in the “Audyssey DSX®” (vpage 152) settings.
z4 Audio is output when “Subwoofer Mode” (vpage 178) in the menu is set to “LFE+Main”.