Marantz SR6008 - Manual (Page 133)

133
Appendix Tips Settings Connections Contents
Front panel Display Rear panel Index Remote
Playback
Playback in ZONE2
ZONE2
MUTE
POWER
VOLUME
X
df
Input source
select buttons
1 Press ZONE2 to switch the zone mode to the ZONE2.
2 Press POWER X to turn on the ZONE2 power.
The ZONE2 power indicator on the display lights (vpage 15).
• Also press input source select button when in standby mode, the
power turns on.
• When POWER X is pressed, ZONE2 turns off.
• Power in ZONE2 can be turned on or off by pressing ZONE2 ON/
OFF on the main unit.
3 Press the input source select button to select the input
source to be played.
The audio signal of the selected source is output to ZONE2.
• Turn INPUT SELECTOR after pressing ZONE2 SOURCE on the
main unit to select an input source.
2 Adjusting the volume
Use VOLUME df to adjust the volume.
• At time of purchase, “Volume Limit” (vpage 184) is set to “70
(–10dB)”.
%
• Turn VOLUME after pressing ZONE2 SOURCE on the main unit to adjust the
sound volume.